Endura Flap Kennel Dog Doors

The "Endura Flap" Kennel Door

• The external trim frame
• Decorative hole plugs to hide the screw heads
• The locking cover assembly (kennels normally use a separate "guillotine" type locking mechanism). However, a locking cover may be added if desired.

The Endura Flap Kennel Door is the only kennel door on the market with a flexible, safe flap.

Every year, animals are harmed by rigid flaps. The typical situation is that the pet is partway out the pet door, is startled by something and jerks back suddenly. The pinching effect of a rigid flap in that case can be terrifying and cause the pet to pull back even harder.

It was for this reason that the first design requirement of the Endura flap was that the flap be flexible and safe for any pet and for any child who should happen to crawl through!

Of course there is a trade-off here. Rigid flaps can be more chew-resistant than flexible flaps. If chewing of the flap is expected, it is best to take some preventative measures. One of the best is to mix some Habanera pepper with Vaseline; and smear this mixture on the edge of the flap. Be careful not to allow any of this mixture in the dogs eyes!

Secondly, if a guillotine door is placed on the inside of the run and the dogs are kept inside when that unit is closed, then the dog cannot get to the flap to chew it.

Rigid flaps are not more durable! Remember that the Endura flap has a 15 year warranty. No kennel flap on the market has anything approaching that.

We suggest you read the complete story behind the Endura flap.

Some additional notes:

• The Endura Kennel door is intended to be installed in either a solid core wood door or in a wall that has been " framed out". If you wish to install the Endura flap in a hollow core door, you'll need to frame out the hollow core door first. Alternatively, you can use a regular Endura flap door mount which is "self-framing" though more expensive.
• If you wish to install the Endura Kennel Door in a wall and don't want to frame the wall yourself, you can purchase the Endura Flap Dog Door for Walls in either single or double flap versions.
• It has been our experience that the Endura flap seals so well that the single flap model will meet most needs even in areas that experience four seasons. However, for really extreme weather, the door mount version and the wall mount version are both available in double flap models.
• There is a significant difference between the rough cut out of the Endura Kennel version and the regular Endura for doors. The regular door mount cut out is larger to allow the bolts to fasten directly to the trim frame. The kennel version is smaller as we intend wood screws (not included) to be used to fasten the frame directly to the door or wall. The kennel door itself may be used as a template or use the rough cutout dimensions given below.

Endura Flap Kennel Door
Outside View

Endura Flap Kennel Door
Inside View

Endura Flap Kennel Door
Open

"Endura Flap"Dog Door for Kennels

Model & Stock Number	# Flaps	Flap Size		Rough Cut Out Dimensions	Outside Frame Dimension		Price	Purchase
#6 03PPK06	1	6" x 11"		71/16"x 14 1/8"	9 7/16"x 15  3/4"		$79
#8 03PPK08	1	8" x 15"		93/16"x 18 3/16"	11 1/2" x 20"		$99
#10 03PPK10	1	10" x 19"		113/16"x 22 3/16"	13  9/16" x 23 5/8"		$129
#12 03PPK12	1	12" x 23"		135/16"x 26 1/4"	15  5/8" x 28"		$159
Quantity Discounts: 10+ units:  5% discount 40+ units: 10% discount
Warranty			Endura Flap Information			Replacement Parts