The Hale Pet Door Omni Window Model pet door
is designed to fit in vertically-sliding double hung or single hung windows. It is offered in dual pane glass and
with double vinyl flaps for increased performance in severe climate areas.
Here are the factory specifications including a description of the adjustment mechanism:
Frame: Designed to fit into a window track 7/8” or wider but can be factory modified to fit tracks as small as ½”.Adjusting Mechanism: Two 4” x 5/16-18 pan head bolts and four 5/16-18 jam nuts. The top two nuts hold the bolts tightly.
The bottom two nuts, when adjusted downward, effect a sideways jackscrew type motion allowing the unit to be tightly secured within
the window track without the use of screws. This mechanism is the same as that used on the Hale Omni Panel for sliding glass doors.Sliding Plate: 1/16” x 4 ½” tall plate on both the inner and outer sides of the adjustment area, color coordinated
to frame color. Plate can be owered to make adjustment and raised to cover mechanism when adjustment is complete.Glass: Double pane insulated tempered glass standard.Pile Weather Stripping:Top and bottom edges of window unit contain dense 5/16” gray nylon pile weather stripping.
Nylon is woven into a .270 wide and 1/32” thick nylon backing. This weather stripping greatly reduces the amount of air that
can pass through the flap particularly in the double flap version.No Metal Contact: Both side edges are covered with 3/32” vinyl booties to provide cushioning and no metal contact.Vinyl Weather Stripping:Unit also comes with extra length of 1 7/8” x 1/16” black vinyl weather stripping to attach to
back edge of your window to prevent air leakage.
To this list we should add that this door comes with the normal Hale 3/16
" Lexan (polycarbonate) locking cover mounted from the side so as to avoid any conflict with the sliding window.
As always, a steel spring-loaded lock secures the locking cover in place. A second locking cover may be added for use on the outside
if desired.
To order this pet door requires you provide us with three bits of information:
The full width of your window (under the window as far as you can go in both dimensions). The unit provided will
have 3" of width adjustment.The width of the window track itself (1/2"
minimum)The "handing" you require (to the left end or the right end when inside the house looking
out the window).
A training benefit ofthe Hale Pet Door line is that the magnets may be removed from the frame using a flat-bladed
screwdriver. The result is the flap is extremely easy to push by even the smallest pet--a training plus. Likewise, and for the
same reason, this would be the best high performance pet door to share between a very large dog and a small dog or cat.
Alternatively, Hale has developed specialized 'training' flaps which simplify training. These may be ordered at 'Replacement
Flaps and Locking Covers' below.
Choosing a flap size:Here are the
Hale recommendations. However, we suggest you do your own measuring as suggested on our "
Measure Your Pet" page prior to making
a decision.
Return Policy: Because these pet doors are built custom to your specification, returns will be allowed a 50% credit toward
the purchase of a different Hale Pet Door. The Patio Pacific
normal return policy applies in respect
to time limits only.
Tip: Will your window open high enough to accept the pet door? Add 4" to flap height and see if your
window will open that far!
Shipping: Allow about 15 days for shipping from the factory plus 1-5 days transit time to you. |
.jpg)
Hale Pet Door Omni for
Vertical Sliding Windows
Hale Pet Door
Available Colors
Satin, Arizona Beige, White, Bronze
.jpg) |
.jpg)
