|
The Pet Door Design System is a method of
installing a dog door directly through the dual-pane glass of your
sliding glass door! This is a neat idea and it's really
essential when you must use your slider for the dog door and a patio
pet panel won't leave enough room for you to go out. Sizes
available are Small through XLarge.
How do you do this? Very simple (but note that you do Not order
directly from this web site. You can, however, see the pricing
below):
- Check that one of the installation
options is suitable for you (see the
Placement Guide). They are:
- 2 panel slider:
Installation in either side of
the inside track panel. When using the center-post side,
it's important to ensure that the screen will not
interfere with the action of the pet door flap.
- 3 panel slider:
Installation may be in either
side of inside track slider or jamb side of 3rd panel.
The same concern applies to the screen as above.
- 4 panel slider:
Installation may be on either side of either inside
track panel.
- Read our "Detailed Information Page"
to get more specific information about how this works. Be sure
to share this information with the local glass shop (see below).
- Print a copy of our "Order
Form" page.
- Engage a local glass shop willing to
do the measuring and installation. The glass shop
installer disassembles your sliding glass door (a very easy
job), takes width, height and thickness measurements then
re-installs your glass slider. He completes his portion of the
Order Form.
- Complete and fax (or mail) to us the
filled-out
Order Form
page. We will calculate the cost of your project and
contact you for payment.
- We then arrange with the factory to
custom-build a new panel with the pet door in the lower corner
that you specify. We have that unit shipped to your glass
shop. The factory will communicate directly with the
installer as needed.
- At your convenience the glass shop
installer returns to your home, uninstalls your glass
panel and replaces it with the new panel containing the pet
door.
Done!
Your are responsible for payment to the glass shop
for the measurement and install. We will charge you only for the pet
door. Our experience is that the cost for these two service calls
will be between $120 and $200.
Because this is a custom order all sales
are final.
Glass that is 34" x 76" or smaller is considered
"standard" size. Glass that is larger than 34" x 76" is considered
"oversize". The largest glass size available is 46" x 92".
You can get an approximation of your actual glass
size right now by measuring the "daylight" dimension (just what you
can see) and adding 3/4" in both dimensions.
Standard Shipping Charges to Any Location in the
Lower 48 States: Std-$95 O/S-$125
Allow 2 - 3 weeks for delivery. |
Sometimes a patio panel pet door just doesn't work!
No room for you to walk out
after installing the panel!
The Solution!
.gif)
Install a Pet Door directly
in your panel!
.jpg)
Bingo! A pet door
"through the glass"
of your sliding glass door |
