The Ideal "Ruff Weather Protector Series"
is identical to the original "Ruff Weather" except that it includes a special alarm that sounds whenever the locking cover is unintentionally removed.
We think this alarm idea will be useful for those who would like to be alerted any time the locking cover is being removed when it shouldn't be.
Otherwise, this product is identical to the original Ruff Weather pet door--one of our best selling items. Please see that page for additional information.
Replacement flaps and wall kits are exactly the same as for the "Ruff Weather".
IDEAL "Ruff Weather" or "Protector Series"Dog Door
Detailed Installation Instructions
Tools Required for Installation
Hammer and Awl (or Nail) . Drill and 3/8" Drill Bit . Saber Saw . Phillips Screwdriver
-
1. DETERMINE TEMPLATE PLACEMENT
- The die-cut template is located in the center of pet door. Remove screws holding the frame together; lift out template. Center template (width) in middle of door; tape in place. Position the top of the template 2" taller than your pet's shoulder. Important: Under no circumstances should the bottom edge of the rough opening be less than 3" from the bottom edge of the wood door.
-
2. OUTLINE PET DOOR OPENING
- With template taped in place, use a pencil to draw around the inside edge of template onto door. Use a nail or awl to mark inside edge corner holes (as indicated) and outer hardware holes.
-
3. DRILLING HOLES
- Drill four 3/8" diameter inside edge corner holes. Next: Drill the eight 3/8" diameter outer door hardware holes.
-
4. CUTTING THE OPENING
- Begin with one of the inside edge corner holes. Next: Using a saber saw, cut along inside edge pencil line.
-
5. ASSEMBLY AND ADJUSTMENTS SEE DIAGRAM)
- Insert outer frame (A) into opening from exterior side (frame must be flush with door surface). Place inner frame (B) into opening from inside door and hold in place. Install screws (C) and tighten until snug. Do not over-tighten.
-
6. LOCKING YOUR PET DOOR USING THE SHURELOCK TM SYSTEM.
Slide cover into guide channels located on both sides of pet door opening. Lock inside slide (D) with Shurelock TM red tab located on door's upper left side.
|
 |
Ideal Pet Products Limited Lifetime Warranty
We believe that our pet doors are the most durable on the market. That's why we were the first to offer a Limited Lifetime Warranty in workmanship and materials. All defective parts will be replaced free of charge. Limited Lifetime Warranty applies to the original purchaser only, with proof of sales receipt. Excludes flap or breakage of the glass panel.
A replacement part will be sent when we receive proof of purchase and a check in the amount of $10.00 to cover shipping and handling, payable to:
IDEAL PET PRODUCTS, INC.
24735 Ave. Rockefeller
Valencia, California 91355
Attn: Pet Products Warranty Dept.
This warranty is void if damage to material is due to improper installation or intentional abuse.
As with any home improvement project, if you do not have the tools or skills to properly install your pet door, we suggest using a professional handyman or licensed contractor.
