Pride Screens Installation

Customer Service | 8am-4:30pm Pacific | (800) 826-2871
Please have stock number and credit card ready


 
Low Price Guarantee for Pet Door Purchases
Low Price Guarantee 		Shipping Times for Pet Door Purchases
Shipping Time 		How to Measure Your Pet for a Dog Door or Cat Door
Measure Your Pet! 		How to Train your Pet to use a Dog Door or Cat Door
Train Your Pet 		View Shopping Cart
View Cart 		Email this page to an interested friend

  Email Page
These graphics show the installation steps for the Pride Screen Adaptor Kit:

First, remove the entire screen assembly and lay it on the floor. Then remove the screen spline from the lower corner as shown.

Fit the screen adaptor frame into the lower corner of the screen frame. Note that the adaptor is sized to fit framing up to a maximum of 1/2" thick. 

Note:  If your screen frame is thicker than that, the work-around is to cut away the outside wall of the adaptor frame to turn the 'U' shape into an 'L' shape which will allow for screen framing of any thickness. Best tool for this would be a table saw set to a shallow cut.

Fasten the adaptor frame in place with sheet metal screws across the bottom and up the sides.

With a sharp knife cut away the screen leaving about 1/2" to overlap the new spline channel.
Using the old screen spline, re-spline the screen into the new channels using the edge of a screwdriver. When you're finished, install the corresponding Pride pet door into the frame using sheet metal screws or pop-rivets. 

  Acceptance Mark 		Customer Service
8am-4:30pm Pacific
(800) 826-2871
Please have stock number
and credit card ready
sales@petdoors.com 		Patio Pacific Inc
202-F1 Tank Farm Rd
San Luis Obispo, CA
93401-7168
Support:
support@petdoors.com

We're A+!

Every effort has been made to ensure accuracy of measurements given on this web site. However, they are not guaranteed.

© 2010 Patio Pacific, Inc