Pride Pet Doors for Doors (while supplies last)
- Aluminum frame and designed for solid doors
- Multiple color options for a seamless look with your home's interior and exterior
- Flap features two piece design and magnets for added insulation
- Suitable for pets of varying sizes, including cats and dogs from small to large
Product Details
Sizing & Fit
Installation Guide
FAQs
ReviewsProduct Details
Expertly crafted with an aluminum frame for durability, the Pride Pet Doors for Doors accommodates all kinds of solid doors and is available in multiple stylish color options, ensuring a seamless match with both your home's interior and exterior.
A single flap door, the Pride Pet Door caters to varying climates to keep your home comfortable and energy-efficient. The two piece flap design has an inner flap and outer gasket design with magnets to provide added insulation against the elements. Ideal for pets of all sizes, from small cats to large dogs, the flap and magnets make it accessible and easy to use.
For added security, each Pride Pet Door includes a closing cover for the interior frame. This versatile pet door is compatible with solid core doors. With a one-year warranty, you can trust the quality and reliability of the Pride Pet Door.
Not the pet door for you? Check out our full list of best-selling pet doors.
Features:
- Durable, aluminum frame for easy installation and long-lasting use
- Weather-resistant flap design with magnets on the flap
- Closing cover included to keep the pets indoors when needed
-
Compatible with solid core doors
- All sizes can be installed through screens using a separate Pride screen adapter kit.
Benefits:
- Dark flap blocks out excess sunlight and prevents heat from entering.
- Ability to install into a screen with the Pride screen adapter.
- Wide variety of frame colors to match your home.
- Thicker flap with magnets provides more wind resistance than other common flaps.
Size Chart
- Small 4 3/4"w x 7"h
- Medium 8 1/2"w x 12 1/2"h
- Large 11 1/2"w x 17"h
- Extra Large 14 1/2"w x 19 1/2"h
Flap Dimensions:
4 3/4"w x 7"h
The entry way your dog goes through.Outside Frame Dimensions
9 1/8"w x 10 1/2"h
The outer edge of the pet door.
Rough Cut Out:
7 5/8"w x 9 5/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
8 1/2"w x 12 1/2"h
The entry way your dog goes through.Outside Frame Dimensions
12 5/8"w x 15 3/4"h
The outer edge of the pet door. Rough Cut Out:
11 1/8"w x 14 7/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
11 1/2"w x 17"h
The entry way your dog goes through.Outside Frame Dimensions
15 1/2"w x 19 3/4"h
The outer edge of the pet door.
Rough Cut Out:
14"w x 18 7/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
14 1/2"w x 19 1/2"h
The entry way your dog goes through.Outside Frame Dimensions
18 3/4"w x 22 3/4"h
The outer edge of the pet door.
Rough Cut Out:
17 1/4"w x 21 3/4"h
The size of the hole needed to fit your pet door into your door.| Flap Size | Flap Dimension | Rough Cut Out | Outside Frame Dimension | Recommended Pet Height |
|---|---|---|---|---|
| Small | 4 3/4" w x 7" h | 7 5/8" w x 9 5/8" h | 9 1/8" w x 10 1/2" h | 5" - 10" |
| Medium | 8 1/2" w x 12 1/2" h | 11 1/8" w x 14 7/8" h | 12 5/8" w x 15 3/4" h | 5" - 19" |
| Large | 11 1/2" w x 17" h | 14" w x 18 7/8" h | 15 1/2" w x 19 3/4" h | 5" - 26" |
| Extra Large | 14 1/2" w x 19 1/2" h | 17 1/4" w x 21 3/4" h | 18 3/4" w x 22 3/4" h | 5" - 31" |
Do not know which flap size to get? Here is a measurement guide to help you out
Replacement flaps can be purchased for this door at Pride Replacement Flaps
Find The Best Pet Door Size For My Pet
A
Pet Height: inches
B
Pet Width: inches
Installation Instructions
Difficulty
Moderate
Steps
05
Time Required
1-2 hours
Sections
01
Flags
00
Parts
- Interior Frame
- Exterior Frame
- Wood Screws
Tools
- Keyhole or pointed saw
- Drill with 3⁄16” and 1⁄2” bits
- Phillips head screwdriver
- Pencil
- Carpenter’s square
- Level
Step 1 Trace the Cutout
- Using the narrow door frame as a template, place it on the surface where the Pride dog door will be installed.
- Hold tightly and trace a line around the inside of the frame opening. Make sure the frame opening is level and straight.
Step 2 Drill Holes
- Drill ½” holes at the inside corners of the lines drawn for the opening.
- Now saw just outside of those lines.
- Once the hole is cut, place the inside narrow frame in the hole and check to make sure it is straight and level.
- Mark the screw holes with a pencil on both sides of the door.
Step 3 Seal the Opening
- Before you install, you will need to finish the opening to prevent weather damage.
- For a solid core door, smooth the opening surface and either paint or seal with waterproof sealant.
- For a hollow core door, use wood filler strips to make a frame and fill the empty space between the inside and outside door skins.
- The wood filler strips should be glued and/or nailed into place to provide a stronger mounting base for the pet door.
- Painting or applying waterproof sealant to the wood filler strips is recommended.
Step 4 Assemble the Pet Door
- You are now ready to assemble the pet door.
- Place the wide aluminum frame with the rubber assembly on the outside of the house door and loosely secure it with wood screws.
- Put the inside narrow frame on the inside of the house door in the same way.
Step 5 Secure the Frames
- Before you tighten the screws, check the pet door for squareness.
- If the rubber assembly is touching the sides of the frame, move the frame horizontally until rubber hangs straight and swings freely. You can check this with a level and/or carpenter’s square. Do this with both the inside and outside frames.
- When both are level, tighten the screws.
Videos
Pride Deluxe Series Pet Doors
FAQ
|
If I would like to use the Pride door through my screen do I just have to purchase the adapter? If you do not have the pet door yet you must purchase the door and the adapter separately. If you already own a Pride Deluxe Pet Door, then yes, you only need to purchase the Pride Door Screen Adapter. We also have the Pride Pet Door for Screens that includes both. |
|
Is there a clear version of the flap available? Currently, there is no clear flap available. The solid black is a durable solution that blocks out sunlight. |
|
My Johnson model had side magnets, does this have side magnets too? This replacement for the Johnson models does not have side magnets in the Small, Medium, and Large. |
|
How do I lock this at night or when I am out of town? A locking cover comes with every purchase. You can slide it on either side of the frame to let your pet know they cannot enter from outside or the inside. |
|
What is the flap made out of? The flap on the pride doors is made out of recycled tire rubber. This does make it heavier, so smaller pets may need training in order to use the door. |
|
How thick does my door have to be in order to install this? There is no thickness required since it is not self framing. You or a contractor will have to frame out the door or wall. |
|
Can I get the U shaped piece by itself? The U shaped piece is not sold separately, it comes with the replacement flap should you need another one. |
|
What kind of weather does this work against? The insulation value is moderate, so it might not be the best choice for climates with extreme wind, cold or hot weather. |
|
What is the locking cover made out of? The cover to secure the opening is made of fiberboard. It is prone to damage from rain so be sure to keep it away from extreme moisture. |
|
Can I install this in a steel door? Yes! This can be installed almost anywhere, although we suggest installing in solid core materials. |
|
I would like to purchase this in replacement of my Johnson frame, are they going to fit the hole in my door exactly the same? The dimensions should be pretty close. We would suggest double checking your existing rough cut to make sure this new item will fit. For any flap size, the rough cut dimension is included in the size chart. |
|
Do you have a Color Chart for Pride Bronze pet doors? The Bronze Pet Door is the main image on the product page. Other colors can be found on the third picture below the main image. |
|
What are the outside frame dimensions of the bronze dog door Pride LD500? The outside frame dimension of the Pride Model LD 500 is 15 1/2" wide x 19 3/4" high. |
|
I want a true brown pet door frame, not black, what dog door do you recommend? The Pride Pet Door is Brown. They have a separate frame color for black. |
|
For sizing properly, what size hole should I cut for a Pride LD 500? The Rough Cut Out is 14" wide x 18 7/8" high. |
|
How much does shipping cost? Shipping is calculated at checkout. |
Warranty
Warranty Type: Limited
Duration: One year from the date of purchase.
Coverage:
The product and its component parts are covered against defects in materials and workmanship.
Defective products or parts can be sent to Z Industries for replacement or repair at no charge within the warranty duration.
Exclusions:
Damage caused by accidents, improper installation, or abuse, including damage caused by pets.
Manufacturer's liability does not exceed the cost of the product.
Consequential damages resulting from product use are not covered.
Warnings:
Proof of purchase date is required for any warranty claims.
Warranty terms may vary by state, so other legal rights may apply based on state regulations.
Customer Reviews
Size Chart
- Small 4 3/4"w x 7"h
- Medium 8 1/2"w x 12 1/2"h
- Large 11 1/2"w x 17"h
- Extra Large 14 1/2"w x 19 1/2"h
Flap Dimensions:
4 3/4"w x 7"h
The entry way your dog goes through.Outside Frame Dimensions
9 1/8"w x 10 1/2"h
The outer edge of the pet door. Rough Cut Out:
7 5/8"w x 9 5/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
8 1/2"w x 12 1/2"h
The entry way your dog goes through.Outside Frame Dimensions
12 5/8"w x 15 3/4"h
The outer edge of the pet door. Rough Cut Out:
11 1/8"w x 14 7/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
11 1/2"w x 17"h
The entry way your dog goes through.Outside Frame Dimensions
15 1/2"w x 19 3/4"h
The outer edge of the pet door. Rough Cut Out:
14"w x 18 7/8"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
14 1/2"w x 19 1/2"h
The entry way your dog goes through.Outside Frame Dimensions
18 3/4"w x 22 3/4"h
The outer edge of the pet door. Rough Cut Out:
17 1/4"w x 21 3/4"h
The size of the hole needed to fit your pet door into your door.| Flap Size | Flap Dimension | Rough Cut Out | Outside Frame Dimension | Recommended Pet Height |
|---|---|---|---|---|
| Small | 4 3/4" w x 7" h | 7 5/8" w x 9 5/8" h | 9 1/8" w x 10 1/2" h | 5" - 10" |
| Medium | 8 1/2" w x 12 1/2" h | 11 1/8" w x 14 7/8" h | 12 5/8" w x 15 3/4" h | 5" - 19" |
| Large | 11 1/2" w x 17" h | 14" w x 18 7/8" h | 15 1/2" w x 19 3/4" h | 5" - 26" |
| Extra Large | 14 1/2" w x 19 1/2" h | 17 1/4" w x 21 3/4" h | 18 3/4" w x 22 3/4" h | 5" - 31" |
Do not know which flap size to get? Here is a measurement guide to help you out
Replacement flaps can be purchased for this door at Pride Replacement Flaps
Find The Best Pet Door Size For My Pet
A
Pet Height: inches
B
Pet Width: inches
Installation Instructions
Difficulty
Moderate
Steps
05
Time Required
1-2 hours
Sections
01
Flags
00
Parts
- Interior Frame
- Exterior Frame
- Wood Screws
Tools
- Keyhole or pointed saw
- Drill with 3⁄16” and 1⁄2” bits
- Phillips head screwdriver
- Pencil
- Carpenter’s square
- Level
Step 1 Trace the Cutout
- Using the narrow door frame as a template, place it on the surface where the Pride dog door will be installed.
- Hold tightly and trace a line around the inside of the frame opening. Make sure the frame opening is level and straight.
Step 2 Drill Holes
- Drill ½” holes at the inside corners of the lines drawn for the opening.
- Now saw just outside of those lines.
- Once the hole is cut, place the inside narrow frame in the hole and check to make sure it is straight and level.
- Mark the screw holes with a pencil on both sides of the door.
Step 3 Seal the Opening
- Before you install, you will need to finish the opening to prevent weather damage.
- For a solid core door, smooth the opening surface and either paint or seal with waterproof sealant.
- For a hollow core door, use wood filler strips to make a frame and fill the empty space between the inside and outside door skins.
- The wood filler strips should be glued and/or nailed into place to provide a stronger mounting base for the pet door.
- Painting or applying waterproof sealant to the wood filler strips is recommended.
Step 4 Assemble the Pet Door
- You are now ready to assemble the pet door.
- Place the wide aluminum frame with the rubber assembly on the outside of the house door and loosely secure it with wood screws.
- Put the inside narrow frame on the inside of the house door in the same way.
Step 5 Secure the Frames
- Before you tighten the screws, check the pet door for squareness.
- If the rubber assembly is touching the sides of the frame, move the frame horizontally until rubber hangs straight and swings freely. You can check this with a level and/or carpenter’s square. Do this with both the inside and outside frames.
- When both are level, tighten the screws.
Videos
Pride Deluxe Series Pet Doors
FAQ
|
If I would like to use the Pride door through my screen do I just have to purchase the adapter? If you do not have the pet door yet you must purchase the door and the adapter separately. If you already own a Pride Deluxe Pet Door, then yes, you only need to purchase the Pride Door Screen Adapter. We also have the Pride Pet Door for Screens that includes both. |
|
Is there a clear version of the flap available? Currently, there is no clear flap available. The solid black is a durable solution that blocks out sunlight. |
|
My Johnson model had side magnets, does this have side magnets too? This replacement for the Johnson models does not have side magnets in the Small, Medium, and Large. |
|
How do I lock this at night or when I am out of town? A locking cover comes with every purchase. You can slide it on either side of the frame to let your pet know they cannot enter from outside or the inside. |
|
What is the flap made out of? The flap on the pride doors is made out of recycled tire rubber. This does make it heavier, so smaller pets may need training in order to use the door. |
|
How thick does my door have to be in order to install this? There is no thickness required since it is not self framing. You or a contractor will have to frame out the door or wall. |
|
Can I get the U shaped piece by itself? The U shaped piece is not sold separately, it comes with the replacement flap should you need another one. |
|
What kind of weather does this work against? The insulation value is moderate, so it might not be the best choice for climates with extreme wind, cold or hot weather. |
|
What is the locking cover made out of? The cover to secure the opening is made of fiberboard. It is prone to damage from rain so be sure to keep it away from extreme moisture. |
|
Can I install this in a steel door? Yes! This can be installed almost anywhere, although we suggest installing in solid core materials. |
|
I would like to purchase this in replacement of my Johnson frame, are they going to fit the hole in my door exactly the same? The dimensions should be pretty close. We would suggest double checking your existing rough cut to make sure this new item will fit. For any flap size, the rough cut dimension is included in the size chart. |
|
Do you have a Color Chart for Pride Bronze pet doors? The Bronze Pet Door is the main image on the product page. Other colors can be found on the third picture below the main image. |
|
What are the outside frame dimensions of the bronze dog door Pride LD500? The outside frame dimension of the Pride Model LD 500 is 15 1/2" wide x 19 3/4" high. |
|
I want a true brown pet door frame, not black, what dog door do you recommend? The Pride Pet Door is Brown. They have a separate frame color for black. |
|
For sizing properly, what size hole should I cut for a Pride LD 500? The Rough Cut Out is 14" wide x 18 7/8" high. |
|
How much does shipping cost? Shipping is calculated at checkout. |
Warranty
Warranty Type: Limited
Duration: One year from the date of purchase.
Coverage:
The product and its component parts are covered against defects in materials and workmanship.
Defective products or parts can be sent to Z Industries for replacement or repair at no charge within the warranty duration.
Exclusions:
Damage caused by accidents, improper installation, or abuse, including damage caused by pets.
Manufacturer's liability does not exceed the cost of the product.
Consequential damages resulting from product use are not covered.
Warnings:
Proof of purchase date is required for any warranty claims.
Warranty terms may vary by state, so other legal rights may apply based on state regulations.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
