Monorail Adapter for Endura/SureFlap Panels


  • Channel attachment for monorail sliding track installation
  • Fits over tracks 3/4" wide by 3/4" high
  • Comes in bronze, satin, and white to match your door
  • Choose from 6 panel sizes

View Warranty

Stock No: 19PPCM

Availability: In stock

Loading options please wait..
What size do I need?
Monorail Adapter for Endura/SureFlap Panels

Hover over image to zoom

  • Channel attachment for monorail sliding track installation
  • Fits over tracks 3/4" wide by 3/4" high
  • Comes in bronze, satin, and white to match your door
  • Choose from 6 panel sizes
Endura/SureFlap SizeFlap DimensionStock Code
Small 6" w x 11" h19PPC06M
Medium 8" w x 15" h19PPC08M
Large 10" w x 19" h19PPC10M
Extra Large 12" w x 23" h19PPC12M
SureFlap DualScan/Cat Flap5 3/4" w x 4 3/4" h19PPC20M
SureFlap Pet Door7" w x 7" h19PPC21M

Endura Flap Monorail Track Adapter for Panels

Many new sliding glass door tracks have a raised track in the the top and bottom as opposed to the recessed channels. The sliding door rides on top of this track and the track actually goes up into a recessed portion in the bottom of the door. This poses a unique problem for patio panel pet doors as there is no track for them to sit into on the top and bottom for stability. This adapter is actually the exact same part used on the top for the height adjustment, it's just turned upside down to give you a channel at the bottom.

  • Installation can be a DIY if you are handy. The adapter comes with guide holes pre-punched, but you will have to drill the finish holes through the panel.
  • Additional screws will need to be purchased locally at the hardware store. Once the adapter is fitted onto the bottom the total thickness of the panel will be 1". Make sure the screws purchased will have a little extra length in order for a rounded cap nut to fit over them.
  • This part is only for Endura or SureFlap panels, it will not be compatible with any other model or manufacturer.

Customer Reviews

Set Direction
  • didnt need it review by Jesse
    5 3 didnt need it

    didnt need it

    (Posted on 1/29/2019)

Weight 1.0000
Manufacturer Endura Flap

Tools/hardware needed:

Drill with a 3/8“ bit

2 screws 1 ¼”

2 nuts

2 screw caps


Two people


Note:  Please review the installation instructions included with your panel to familiarize yourself normal installation guidelines.

 Adapter Installation:

  1. 1. Take the panel, lay it on a table thumbscrews facing up and clamp it to the table. 
  2. 2. Take adapter side with the pre-punched holes and line it up on the bottom of the panel facing up.  Take the second piece and put that on the back side of the panel and clamp both pieces to the bottom of the panel. 
  3. 3. With the end of the panel hanging slightly off the table drill the holes straight through the panel and adapter pieces (all the way until the drill bit punches through the other side of the adapter). 
  4. 4. Remove the panel from the table and remove the clamps holding the adapter to the panel.
  5. 5. Apply Weather stripping to sides of panel.
  6. 6. Have one person hold the panel in place over the monorail track, leaving at least ¼” of space between the bottom of the panel and the track. 
  7. 7. The second person needs to slide the adapter pieces together onto the inside and outside face of the patio panel so that they overlap and sandwich the panel and track. 
  8. 8. With the second person still holding the panel have them gently lower it until it is resting on the adapter and the adapter channel is resting on the sliding door track.  Put the two screws through the holes and screw the nuts on and place protective screw caps. 
  9. 9. Double check to make sure that the screw end is not protruding and there are no sharp edges sticking out.
  10. 10. Gently release the thumb screws so the height adjustment piece rises into the upper track.  Tighten the thumbscrews to fix the top tension adjustment piece in place.
  11. 11. Assure that the panel is stable and fixed in place, after that have the second person release the panel.  

Write Your Own Review

You're reviewing: Monorail Adapter for Endura/SureFlap Panels

  • 1 star
    2 stars
    3 stars
    4 stars
    5 stars

* Required Fields

Patio Pacific Inc Endura Flap™ Pet Door Warranty

To the original purchaser, Patio Pacific Inc warrants this product and all of its component parts to be free of defects in materials or workmanship for a period of 10 years from the date of delivery to the customer.

Endura Flap™ assemblies are warranted for a period of 15 years. Endura Flap™ assemblies employed in commercial kennels are warranted for a period of 3 years.

Damage caused by accident, improper installation, abuse or normal wear, including damage by pets or glass breakage, is specifically excluded from this warranty.

Defective materials returned to Patio Pacific Inc, together with proof of purchase, will be repaired or replaced and returned to the customer free of charge.

Pet doors of other manufacturers installed in Patio Pacific products are covered by the warranty of the other manufacturer and not by Patio Pacific Inc.