PetSafe Horizontal Window Pet Door

SKU# 07PPC23

  • No tools required for this quick and easy, spring loaded installation
  • Height is adjustable up to 3 inches to fit most horizontal sliding windows
  • Comes with Frame, Pet Door, and Closing Cover For Cats and Small Dogs
  • Corrosion resistant aluminum framing and plastic pet door

Stock No: 07PPC23

Availability: In stock

$140
Loading options please wait..
What size do I need?
$140
PetSafe Horizontal Window Pet Door

Hover over image to zoom

  • No tools required for this quick and easy, spring loaded installation
  • Height is adjustable up to 3 inches to fit most horizontal sliding windows
  • Comes with Frame, Pet Door, and Closing Cover For Cats and Small Dogs
  • Corrosion resistant aluminum framing and plastic pet door
Flap SizeFlap DimensionOverall Panel WidthStock No 
Small5 1/8" x 8 1/4"15"07PPC23 

Adjustment Ranges

  • 34" - 37"
  • 46" - 49"

Pet door has 1" framing, measure your track width to make sure that your window will accommodate the panel.

 

PetSafe Horizontal Window Pet Door

The PetSafe door for Horizontal Sliding Windows is a fast, affordable way to install a pet door in your home. This window insert requires no drilling or cutting (can be trimmed 3/4" narrower with metal cutting blade if needed) and can be installed in seconds. Our spring loaded design allows for instant adjustment of up to 3 inches and creates a snug weather-tight fit. Great for cats and small dogs, this pet door will give you and your pets the freedom to come and go as you please. Also included is a door cover that snaps into place, giving you control over when your pet can enter or exit.

Features

  • Flexible vinyl flap is easy for all small pets to use
  • Single pane tempered glass
  • Spring loaded design allows for installation and removal in seconds. No tools needed/li>
  • Built-In Anti-Whoops allows for 3/4" change in adjustment range to allow for small measuring errors
  • Adjustment Ranges accommodate windows 34" - 37" and 36 " - 49" in height. Be sure your track width is at least 1"
  • Control access with the snap on closing cover

Customer Reviews

Set Direction
Weight 1.0000
Your Maximum Pet Size Cats, Large Cats, Small Dogs
Type of Window Sideways Sliding
Climate Suitability Mild or Utility
Sealing Value Average
Wind Resistance Average
Color White
Frame Material Aluminum
Insulation Value Average
Flap Material Vinyl
Flap Design Single
Flap Colors Tinted
Dual or Single Pane Single Pane 3/16" Thick
Ability to Lock Flap Closing Cover (Not Locking)
Can Be Installed In Sideways Sliding Windows
Manufacturer's Restocking Fee 0

Installation Instructions for the PetSafe Horizontal Window Pet Door

1. Open your window

2. Place the PetSafe Window Pet Door into the track next to your window

3. Loosen the screws at the top to release the spring load

4. The top of the pet door should go up into the top track all the way. Once in place hand tighten the screws.

5. Remove the blue cover over the adhesive and install the draft stopper so that the edge without the adhesive is just barely touching the glass on the stationary.


Adjusting the Pet Door for your Window

Due to the fact that there are many types of windows, you may need to modify your installation using shims or similar materials such as foam weather stripping. If there is a gap, you can use the shims to even out the pet door.

Removing Your PetSafe Horizontal Window Pet Door

You will first need to loosen the thumbscrews. Then compress the window pet door and tighten the thumbscrews once again for easy removal.

 


Click below to expand:

First open up your window and check that it can slide open wide enough for the 15" panel to fit. Next measure the height of the track from deepest part in the bottom to the deepest part up inside the top. Last measure how wide the track is that the window slides in (needs to be at least 1")

Track width needs to be at least 1" thick.

This is designed to be a fairly simple install that does not require any tools. You loosen the screws, set the top of the panel into the top track, then lift the bottom of the panel up and over into the track. Once in place you tighten the screws and that's it.

The pet door has flexible flap with a magnet on the bottom to help hold is shut. The glass is single pane for moderate insulation value, that said this is recommended for more mild climates or if you a simply on a fixed budget.

If you've mismeasured, you may be able to fix it. To make your cat door about 3/4" taller, you may purchase a (or make your own using 1" x lumber). To make your window kitty door insert slightly shorter you may trim the side flanges on the spring loaded adjustment piece at the top with a hacksaw or a jigsaw with a metal cutting blade.

Any of the doors that are labeled as custom mean it is non-returnable.

Write Your Own Review

You're reviewing: PetSafe Horizontal Window Pet Door

  • 1 star
    2 stars
    3 stars
    4 stars
    5 stars
     
     

* Required Fields