- Outer frame replacement for all Magnador dog doors
- Comes in white or bronze
- Available in small, medium, and large
- Other Magnador pet door replacement parts sold separately
The Magnador Outer Frame fits all of the Magnador pet doors and comes in sizes small, medium, and large. The frame is available in white or bronze, and it can also be changed without needing to replace the entire pet door. Please note that this kit does not include the hinge pins for the flap, which are sold separately.
Not the dog door parts you're looking for? Take a look at our full selection of Magnador dog door replacement parts.
Size Chart
| Flap Size | Flap Dimension | Color | Outside Frame Dimension | Stock Nr |
|---|---|---|---|---|
| Small "Mini" | 6" w x 8" h | White | 7 7⁄8" w x 10 1⁄2" h | 19MDof MFR |
| Bronze | 19MDof MFR-B | |||
| Medium "Mag I" | 11" w x 13" h | White | 13" w x 15 5⁄8" h | 19MDof M1FR |
| Bronze | 19MDof M2FR-B | |||
Large
| 13" w x 19 3⁄4" h
| White | 16 7⁄8" w x 23 3⁄4" h | 19MDof M2FR |
| Bronze | 19MDof M2FR-B |
Warranty
Lakeside Products warrants to the original purchaser this product to be free of defects in materials and workmanship for a period of one year from the date of purchase (proof of purchase required). Specific exclusions from this warranty include damage caused by accident, improper installation or abuse, including damage caused by pets. Lakeside Product's maximum liability on any claim shall be no greater than the original purchase price of the product. Under no circumstances shall Lakeside Products be responsible for consequential damage resulting from the use or miss-use of this product. For warranty claims, please return defective product or part, including PROOF of PURCHASE DATE, freight prepaid, to Lakeside Products for repair or replacement. Purchaser is responsible for return shipping and handling charges.This warranty is the only warranty made by Lakeside Products and replaces any and all previous warranties.
Installation Instructions
To replace the frame of your Magnador Pet Door, the entire assembly must be taken from its installation location.
Step 1: Remove the flap from the existing frame.
Step 2: Use side cutters to cut away the top portion of the side that needs replacing.
Step 3: Slide the flap out to one side and remove the hinge pins by tapping with a hammer. Make sure to not bend the pins.
Step 4: Lay the flap into the new frame, lining up the hinge pin holes on the flap with the frame.
Step 5: Tap the hinge pins back in gently with a hammer.
Step 6: Using the same hardware and hinge pins, remount the pet door with your new frame. Screw the frame into the existing holes from the previous frame.