FAST U.S. SHIPPING & EASY RETURNS

Home > Installation Instructions > Patio Pacific Sash Window Pet Door - Installation Instructions

Patio Pacific Sash Window Pet Door - Installation Instructions

Installation Instructions

Installation icon Difficulty Easy
Installation icon Steps 04
Installation icon Time Required 0.5 hours
Installation icon Sections 01
Installation icon Flags 00

Parts

  • 1 Sash Window Panel
  • Pet Door Locking Cover
  • Foam Weatherstripping

Tools

  • Flathead Screwdriver

Please read instructions & notes thoroughly before installation.

Step 1 Loosen Width Adjustment Locks

  • Release the automatic width adjustment locks by loosening the screws with a screwdriver. This allows the spring mechanism to move freely from side to side.

Step 2 Test Fit the Panel

  • Before applying weatherstripping, test installing the sash into your window track.
  • Insert the sash into the window track. Push against the spring mechanism and swing the opposite end into the opposite window track.
  • Gently release then tighten the width adjustment locks.
  • It is important to test that the sash fits properly before applying the weatherstripping. If it sits properly, you can remove it to put on the foam weatherstripping in step 3.

Step 3 Apply Weatherstripping

  • Apply the foam weatherstripping by peeling back the paper and exposing the adhesive.
  • Unroll it along the edge of the sash, pressing to ensure it adheres.
  • Install on both the top and the bottom. Trim to fit with scissors.

Step 4 Insert Into Track

  • Place the sash back into the window, then tighten the width adjustment lock to lock it in place.

Sash Window Panel Tips

Adjusting the Pet Door for your Window

  • Due to the fact that there are many types of windows, you may need to modify your installation using shims or similar materials, and depending on window design you may need to create a track with a quarter-round or 1" square wood strip.
  • If there is a gap, you can use the shims to even out the pet door. A foam weather stripping can also be used around the edges for additional insulation.

Removing Your Sash Window Pet Door

  • You will first need to loosen the width adjustment locks, you may first need to lift the pet door up to loosen the bottom screw.
  • Then compress the window pet door and tighten the width adjustment locks once again for easy removal.

Removing the Press-Fit Closing Cover

  • Step 1: Place thumbs in center of cover.
  • Step 2: Place fingers on the back side of the wings sticking out of the sides of the cover.
  • Step 3: Push with thumbs and Pull with fingers at the same time to unsnap the cover from the frame.

Lock Details

A great way to lock your sliding window is a Charley bar or screw in the track. Both work off the same concept - they block the slider from opening. When engaged you cannot pull the sliding door away from the pet door panel.

Switch the Side of the Flap

You can switch which side of the sash panel the pet door flap is on to best fit your home.

Step 1

  • Remove the screws on the inside of the pet door frame and remove both frame pieces.

Step 2

  • Rotate the flap assembly 180° so the opening is on the opposite side. Make sure the locking cover is on the same side as the width adjustment locks.

Step 3

  • Reinstall the pet door using the original screws.