• Helps reduce drafts with two flexible vinyl flaps and perimeter weatherstripping
  • Gives pets daily independence without leaving your door wide openOffers a practical balance of comfort, value, and everyday durability
  • Lightweight flap design works well for a wide range of pet sizes
  • Magnetic strips help the flaps settle back into place after useTinted flaps help protect against sun-related warping
  • Sliding security cover can be used from either side of the frame
  • Available in Small, Medium, Extra Large, and Super Large flap sizes

Ideal Designer Series Ruff Weather Dog Door for Doors

All-Season Everyday Freedom

Regular price $271.00

Fast & Free Shipping in the USA.

Satisfaction Guarantee -


Flap Size


A budget-friendly double-flap dog door for standard doors that helps reduce drafts, supports pets from small to super large, and includes a sliding security cover for added peace of mind.

The Ideal Designer Series Ruff Weather Dog Door is a practical choice for pet owners who want more weather protection than a basic flap without moving into a premium high-performance door.

Its double-flap design creates an insulating air space between the two vinyl flaps, helping reduce drafts while still keeping the flap light enough for most pets to use comfortably. This makes it a helpful middle-ground option for everyday homes, mild to moderate weather, and families with pets who need frequent access outside.

The magnetic flap bottoms help the door close after each pass-through, while the weatherstripping around the flaps supports a better seal than a single-flap setup. The tinted flap material also helps protect the flaps from sun-related warping over time.

Installation & Fit

  • Fits standard doors 3/4" to 1 3/4" thick
  • Mounts into aluminum, hollow core, metal, solid core, or steel doors
  • Secures through the door with the included frame system and hardware
  • Includes a cutting template for creating the door opening
  • Uses a sliding security cover that can be placed on either side of the frame
  • Requires a separate wall kit for 2" x 4" or 2" x 6" stud wall installation.

Best Suited For

Ideal for:

  • Homes that need a practical, everyday dog door with better insulation than a basic single flap.
  • Pet owners who want a lightweight flap that is easier for pets to push through.
  • Multi-pet households with pets ranging from small dogs to very large dogs.
  • Standard exterior doors where a double-flap design is preferred.
  • Buyers who want a more economical alternative to premium severe-weather pet doors.
  • Large dog owners who need a taller flap opening, especially in the Super Large size.

Not ideal for:

  • Homes needing maximum insulation or heavy wind performance may be better served by Endura Flap Pet Doors.

Questions

What's in the box?

  • Installation Template
  • Inner Frame
  • Outer Frame
  • Locking Cover
  • Door Mount Screws

Where can I find replacement flaps?

Ideal Ruff Weather replacement flaps are sold individually, so if you would like to replace both flaps, change the quantity to two.

Is this a good door for large and small pets sharing?

Yes, the flaps are light enough for smaller pets to use. When ordering your Ideal Pet Door, it's best to base your size measurements on your pets' heights than their weight ranges. You should get a size tall enough for your tallest pet to use while installing it low enough for your shortest pet to step over.

I have a Golden Retriever that weighs around 70lbs. How do I know what size to get my pet? Should I purchase the Ruff Weather Dog Door Extra Large?

We recommend you take a look at our measurement guide; finding the right pet door has more to do with height than weight. You may need the Ideal Ruff Weather Dog Door Super Large depending on your pup's height.

Explore all questions
Product Details

Product Details

The Ideal Designer Series Ruff Weather Dog Door is a practical choice for pet owners who want more weather protection than a basic flap without moving into a premium high-performance door.

Its double-flap design creates an insulating air space between the two vinyl flaps, helping reduce drafts while still keeping the flap light enough for most pets to use comfortably. This makes it a helpful middle-ground option for everyday homes, mild to moderate weather, and families with pets who need frequent access outside.

The magnetic flap bottoms help the door close after each pass-through, while the weatherstripping around the flaps supports a better seal than a single-flap setup. The tinted flap material also helps protect the flaps from sun-related warping over time.

Sizing & Fit

Size Chart

Flap Dimensions:

5"w x 9 1/4"h

The entry way your dog goes through.

Outside Frame Dimensions

9 1/16"w x 13 3/8"h

The outer edge of the pet door.

Small flap
Small frame
Small rough cut

Rough Cut Out:

6 1/2"w x 11 1/4"h

The size of the hole needed to fit your pet door into your wall.

Flap Dimensions:

7 1/4"w x 13"h

The entry way your dog goes through.

Outside Frame Dimensions

11 3/8"w x 17 1/2"h

The outer edge of the pet door.

Medium flap
Medium frame
Medium rough cut

Rough Cut Out:

8 3/8"w x 15"h

The size of the hole needed to fit your pet door into your wall.

Flap Dimensions:

9 3/4"w x 17"h

The entry way your dog goes through.

Outside Frame Dimensions

13 15/16"w x 21 5/8"h

The outer edge of the pet door.

Extra Large flap
Extra Large frame
Extra Large rough cut

Rough Cut Out:

11 1/8"w x 19 1/4"h

The size of the hole needed to fit your pet door into your wall.

Flap Dimensions:

15"w x 23 1/2"h

The entry way your dog goes through.

Outside Frame Dimensions

19"w x 28 1/8"h

The outer edge of the pet door.

Super Large flap
Super Large frame
Super Large rough cut

Rough Cut Out:

16 1/4"w x 25 3/4"h

The size of the hole needed to fit your pet door into your wall.

Flap Size Flap Dimension Rough Cut Out Outside Frame Dimension Recommended Pet Height
Small 5"w x 9 1/4"h 6 1/2"w x 11 1/4"h 9 1/16"w x 13 3/8"h 7" - 13"
Medium 7 1/4"w x 13"h 8 3/8"w x 15"h 11 3/8"w x 17 1/2"h 7" - 19"
Extra Large 9 3/4"w x 17"h 11 1/8"w x 19 1/4"h 13 15/16"w x 21 5/8"h 7" - 26"
Super Large 15"w x 23 1/2"h 16 1/4"w x 25 3/4"h 19"w x 28 1/8"h 7" - 36"

Do not know which size to get? Here is a measurement guide to help you out

Installation Guide

Installation Information

Ideal Ruff Weather Door Installation

Installation icon Difficulty Moderate
Installation icon Steps 6
Installation icon Time Required 1-2 hours

Parts

  • Installation Template
  • Inner Frame
  • Outer Frame
  • Locking Cover
  • Door Mount Screws

Tools

  • Hammer and awl (or nail)
  • Drill and 3⁄8" Drill Bit
  • Saber Saw
  • Phillips Screwdriver

Step 1 Outline Pet Door Opening

Outline Pet Door Opening
  • The die-cut template is located in the center of pet door.
  • Remove screws holding the frame together; lift out template.
  • Center template (width) in middle of door. Tape in place.
  • Position the top of the template 2" taller than your pet's shoulder.
  • Under no circumstances should the bottom edge of the rough opening be less than 3" from the bottom edge of the wood door.

Step 2 Mark the Holes

Mark the Holes
  • With template taped in place, use a pencil to draw around the inside edge of template onto door.
  • Use a nail or awl to mark inside edge corner holes (as indicated) and outer hardware holes.

Step 3 Drill the Holes

Drill the Holes
  • Drill four 3⁄8" diameter inside edge corner holes.
  • Then drill the eight 3⁄8" diameter outer door hardware holes.

Step 4 Cut the Opening

Cut the Opening
  • Begin with one of the inside edge corner holes.
  • Using a saber saw, cut along inside edge pencil line.

Step 5 Insert the Frames

Insert the Frames
  • Insert outer frame (A) into opening from exterior side (frame must be flush with door surface).
  • Place inner frame (B) into opening from inside door and hold in place.

Step 6 Install the Screws

Install the Screws
  • Install screws (C) and tighten until snug.
  • Do not over-tighten.
Videos

Videos

Ideal Ruff Weather Durability Test


FAQs

FAQ

Reviews

Customer Reviews

Request Freight Quote

Track heights exceeding 106 inches (107" or higher) may require additional shipping charges. Please provide your contact information for a custom freight quote, and our team will follow up during normal business hours.