Flap Dimensions:
5"w x 9 1/4"h
The entry way your dog goes through.
Outside Frame Dimensions
9 1/16"w x 13 3/8"h
The outer edge of the pet door.
Rough Cut Out:
6 1/2"w x 11 1/4"h
The size of the hole needed to fit your pet door into your wall.
Couldn't load pickup availability
The Ideal Designer Series Ruff Weather Dog Door for Walls offers premium insulation and durability, providing your pet easy access to the outdoors while keeping your home energy-efficient. Built with dual tinted vinyl flaps and surrounded by brush weatherstripping, this door effectively blocks drafts and holds up to wind—making it perfect for temperate, three-season climates.
The telescoping tunnel adapts to wall thicknesses from 4 3/4" to 5 1/4" or 6 3/4" to 7 1/4", making it versatile for different installations. A robust 3" thick plastic frame stands up to the elements and years of use, while the sliding locking cover can be placed on either side for added security.
Installation is straightforward with the included template and hardware—no guesswork, no headaches. With four flap sizes from small to super-large, this pet door is built to accommodate pets of every size.
Designed for energy efficiency and built to last, the Ideal Designer Series Ruff Weather Dog Door for Walls is a smart, durable choice for your home.
Not the door you're looking for? Check out our other Ideal Pet Door Flaps and Doors.
5"w x 9 1/4"h
The entry way your dog goes through.
9 1/16"w x 13 3/8"h
The outer edge of the pet door.
6 1/2"w x 11 1/4"h
The size of the hole needed to fit your pet door into your wall.
7 1/4"w x 13"h
The entry way your dog goes through.
11 3/8"w x 17 1/2"h
The outer edge of the pet door.
8 3/8"w x 15"h
The size of the hole needed to fit your pet door into your wall.
9 3/4"w x 17"h
The entry way your dog goes through.
13 15/16"w x 21 5/8"h
The outer edge of the pet door.
11 1/8"w x 19 1/4"h
The size of the hole needed to fit your pet door into your wall.
15"w x 23 1/2"h
The entry way your dog goes through.
19"w x 28 1/8"h
The outer edge of the pet door.
16 1/4"w x 25 3/4"h
The size of the hole needed to fit your pet door into your wall.
| Flap Size | Flap Dimension | Rough Cut Out | Outside Frame Dimension | Recommended Pet Height |
|---|---|---|---|---|
| Small | 5"w x 9 1/4"h | 6 1/2"w x 11 1/4"h | 9 1/16"w x 13 3/8"h | 7" - 13" |
| Medium | 7 1/4"w x 13"h | 8 3/8"w x 15"h | 11 3/8"w x 17 1/2"h | 7" - 19" |
| Extra Large | 9 3/4"w x 17"h | 11 1/8"w x 19 1/4"h | 13 15/16"w x 21 5/8"h | 7" - 26" |
| Super Large | 15"w x 23 1/2"h | 16 1/4"w x 25 3/4"h | 19"w x 28 1/8"h | 7" - 36" |
Do not know which size to get? Here is a measurement guide to help you out
Number of Flaps:
1 - Single Flap: On inside of wall (same side as locking cover)
2 - Double Flap: One on each side. The included dead-air-space and extra flap add significantly to the already considerable insulation and sealing values.
I have not used it yet, it should be installed within the next two weeks, unfortunately we had more renovations than we anticipated!! Our construction guy loves the door and info that came with it!
All sizes of dogs can use it! Keeps the cold out!
Easy to install but aligning holes are critical for proper installation.
I have had this installed for a year now. The flaps don't close correctly and have gaps allowing the hot air and cold air to enter the room. I have this installed in my basement family room where we frequently watch tv. I feel the draft coming from this door, especially when it is very cold outside like right now. The flaps don't completely seal on the sides (there are bows on both sides so it doesn't hang straight) and the bottom doesn't frequently seal - the bottom of the door is a magnet on a floating bar and the bottom of the flap is metal. The magnetic bar is supposed to rise up and meet the flap to seal the bottom. This happens maybe 3 times out of 10. . I had the smaller version of this door that I bought maybe 15 + years ago and was very satisfied with it. I regret buying this model and installing it
Flaps don’t fit the tunnel. They are too wide and get stuck in the middle of the opening. I will have to trim them to size so they work correctly. Also the magnet of the one side sucks.