Replacement Flaps

Please note that the flap size measurement—the opening actually available to the pet—is usually a little smaller than the complete flap dimension as there will usually be space at the top of the flap to attach it to the pet door frame. Also, if you have the correct brand, don't worry about the dimensions being slightly off. It's common for customers and us to measure slightly differently.

If you know the brand or trade name, please select it from the groups above. These links will take you directly to the appropriate location in our secure online store where you can place an order. One section may offer multiple sizes of dog door replacement flaps.

If you're not sure of the brand, review the images and product details in the category page for the type of pet door you have. You'll very likely recognize your pet door. Once you have determined the brand and size of your old flap, you can begin the replacement process.

How to find out which replacement flap you need?

Useful information
to identify your flap

» Check how the flap attaches to the frame at the top
» Read the logo to see the manufacturer
» Note the material of the flap - rigid or flexible? Clear?
» Look at the bottom to see the type of magnet
» Note anything else specific about your flap

Ideal Replacement Flaps | Clear material

Ideal Original [Old]

- Holes at top
- Smooth metal strip at the bottom
- Rectangular shaped logo in the center
- Made in USA written on the flap
- Buy Here >

Ideal Original

- Holes at top
- Metal strip at the bottom with rivets
- Round shaped logo in the center
- Buy Here >

Ideal Deluxe [Old]

- Ridge at top
- Smooth metal strip at the bottom
- Rectangular shaped logo in the center
- Made in USA written on the flap
- Buy Here >

Ideal Ruff Weather

- Holes at the top, smooth edges
- Metal strip at the bottom with rivets
- Blank rectangular shape in the center
- Dimensions in the lower corner
- Pet door has fuzzy weatherstripping around the edge
- 2 flaps per pet door, sold individually
- Buy Here >

Ideal Insulator

- Holes at the top, smooth edges
- Metal strip at the bottom with rivets
- Blank rectangular shape in the center
- Dimensions in the lower corner
- Staggered side magnets
- Pet door has fuzzy weatherstripping around the edge
- 2 flaps per pet door, sold individually
- Buy Here >

Draft Stopper/Ultra-Flex

- Attaches with pins at the top
- 3 clear rigid panels
- Flexes at connecting rubber material
- We do not carry rubber replacements, only the entire flap
- Buy Here >

PetSafe Replacement Flaps | Tinted material

PetSafe Freedom

- Holes at top
- Smooth metal strip at the bottom
- PetSafe logo in the center
- Buy Here >

PetSafe Classic

- Raised bumps at the top to slide flap in place
- Multiple magnets at bottom vary based on size
- PetSafe logo in the center
- Buy Here >

PetSafe Ultimate/Johnson

- 2-pieces, main flap + outer U-gasket
- Holes at the top, multiple magnets at the bottom
- PetSafe logo, "Johnson" or flap size at center
- Discontinued by manufacturer
- Alternative flap available 

- Buy Here >

Other Brands | Various styles

Hale

- Holes at top within metal bar
- Multiple magnets around border
- No logo, tinted but clear vinyl
- Fuzzy weather stripping on frame
- Buy Here >

Endura Flap

- Attaches with a rod at the top
- Flexible semi-clear material
- Solid magnet strips along sides
- Dual layered, divided in 3 sections
- Buy Here >

PlexiDor

- Saloon style flaps
- Clear but tinted rigid panels
- Fuzzy weather stripping around edges
- Sold individually
- Purchase from PlexiDor directly 800-749-9609

Frequently Asked Questions

Do you have Johnson replacement flaps for my dog door?

No, we do not have the Johnson brand replacement flaps because they have been discontinued, however we do carry Pride replacement flaps which fit as a replacement for Johnson and PetSafe Ultimate doors. The only exception to this is that the small flap size has nubs at the top and slide into a channel which holds them in place rather than having to screw them in as was the case for the small Johnson/Ultimate flaps, so that size would not work without modification. Tons of customers have used Pride Flaps to replace their Johnson and PetSafe Ultimate pet doors.

Is there a clear flap I can get instead of the Pride flap?

The Pride flaps are made from recycled tires and are only offered in the thicker black heavy rubber. None of the clear flap are size compatible to the Pride. You will need to purchase replacement door if you would like a clear flap.

What is the stock number for Pride flaps?

The stock number for Pride Flaps is 10ZS.

Can a rectangular logo be used to replace a round logo flap for my Ideal doggie door?

You can't mix the logos as the flaps won't fit each other. We suggest that you see the Ideal "original" and "Deluxe" Replacement Flap product page for more information.

What is the stock code for Ideal Original Replacement flaps?

The stock code for Ideal Original Replacement flaps is 10RIo.

What is the stock code for Ideal Ruff Weather Replacement flaps?

The stock code for Ideal Ruff Weather Replacement flaps is 10RIr.

I have a Hale Single Flap doggy door, which flap mount should I choose, inside or outside?

For a single flap Hale pet door, you should select the outside flap.

My Endura Flap wall mount is too heavy for my dog to push, could I replace it with a different flap that is easier to push?

Flaps are not interchangeable, but if your dog is having difficulty pushing the door open, you can adjust the magnet strength for training by actually moving the magnets. We have an instructional video demonstrating how to adjust the magnet strength.

Are Ideal Ruff Weather flaps sold in pairs?

The door itself comes with two flaps, but when purchasing replacements they are sold individually, so you would need to order a quantity of 2 to replace both Ideal Ruff Weather Flaps. This is done so you can replace flaps when they wear out (as one flap might wear more than the other with use).

PetSafe gave me your number and said that you would have a replacement flap for my door that was discontinued, do you have that?

Yes, we carry the Pride replacement flap that will fit the PetSafe Ultimate and Johnson doors. There are a few models, such as the Quick Fit, that have been discontinued we no longer carry.

There is a part number of PAC11-11038 on my door, which flap replacement is that?

That would be for the PetSafe "Freedom", "Plastic", and "Extreme Weather" replacement flaps, as all those models start with a ""PAC..."".

Which is the replacement for my Pet-Eze door?

The PetSafe "Classic" replacement flap is a suitable replacement for the Pet-Eze door. These flaps are being discontinued by PetSafe, so purchasing more than one might be a good choice while they are still available.

Why is the double flap Endura door 1" shorter than the single flap version?

The single flap and double flap sizes are identical, although the space available for the pet do go through changes. The only reason we say the double flap is shorter is that you have 2 flaps that will hit each other as the pet is going in or out. Since each flap is about 7/8" in thickness when this happens you lose about an inch of space up at the top.

How do I determine what size flap to get for my pet?

We suggest that you measure your pet from the bottom of their feet to the tallest part of their back for height, and for width, you can open a door in your home wide enough for your pet to walk through comfortably with a little room on either side and measure that opening. Another approach is to cut an opening in a piece of cardboard to the exact flap dimension we have listed on the size chart and see if your pet can pass through easily. This works the best for cats and small dogs. Remember to give a little extra height for a wall-through installation or if both tall and short pets must share the same door.

What is the difference between the round and rectangular Ideal flap logo?

The different logos signify different flaps due to manufacturing changes. The rectangular logo signifies your flap was made in the USA while the round logo signifies your flap was made in Thailand. Depending on which model you have (rectangular or round logo), you must buy replacement flaps accordingly, as they are not interchangeable. Please take a look at our Ideal Original/Deluxe Replacement Flaps for more information.

What is the warranty on my Endura flap?

Patio Pacific Endura Flap Pet Door Warranty: To the original purchaser, Patio Pacific warrants this product and all of its component parts to be free of defects in materials or workmanship for a period of 10 years from the date of delivery to the customer. Endura Flap assemblies are warranted for a period of 15 years. Endura Flap assemblies employed in commercial kennels are warranted for a period of 3 years. Damage caused by accident, improper installation, abuse or normal wear, including damage by pets or glass breakage, is specifically excluded from this warranty. Defective materials returned to Patio Pacific, together with proof of purchase, will be repaired or replaced and returned to the customer free of charge. Doggy doors of other manufacturers installed in Patio Pacific products are covered by the warranty of the other manufacturer and not by Patio Pacific.

I have an Ideal Deluxe dog door that I purchased back in 2004, which flap do I need round or rectangular?

Existing Models of the Ideal Deluxe Pet Door purchased before 2006 will need a rectangular logo design on the flap.

Do the Hale flaps come with all the weather stripping and magnets?

Yes, the Hale flaps come with complete replacement nylon weather stripping, drill bit, replacement screws, and replacement magnets.

Can I get the flap and frame for my Ideal Fast Fit panel?

Yes, the Ideal Fast Fit Flap and Frame Assembly are available for purchase. Please make sure you are ordering the correct logo for your specific panel. If you don't have the flap you can figure out what logo you have a couple of other ways. You can measure the entire width of the panel, as these measurements changed when the manufacturing location did. Or if you unscrew the frame from the patio panel, if it's one piece that screws directly into the sides of the aluminum frame, it's an old-style rectangular logo. If the frame is two pieces that screw into each other than it a new style round logo.

I have a dog door that says PetSafe Training Systems and has a magnetic strip all the way across the bottom. What flap do I need?

The flap you are looking for is the PetSafe "Classic" Replacement Flap. If the flap measures 5" x 4" and is affixed to the frame by a single screw at the top of the flap, then it is the Classic Replacement Flap.