- Flap replacements and temporary training flaps for all Hale pet door models
- Flaps include weather stripping and frame magnets
- Strike pieces already pre-installed on the flap
- Outside mount needed for single flap doors and screen doors
- Replace inside and/or outside mount for double flap doors
The Hale pet door replacement flaps are made of clear, flexible vinyl with fuzzy weather stripping and new magnets. They provide the same insulation value as the flap(s) that came with your original Hale dog or cat door. All installation hardware is included. If you are unsure of your flap dimension, measure the outside frame to get an accurate measurement. Use the size chart for all flap measurements. This is also the information needed if you have a custom dimension door, as we'll need to make the correct size pet door for you. Contact customer service to order a custom-sized Hale pet door flap replacement. Please note, any flap larger than a Giant Hale pet door size will not be covered by warranty.
For a single flap model: you will need to choose the outside mount version in the menu.
For double flap models: you can replace the inside and/or outside, depending on which ones need replacing.
If adding an extra flap to convert from a single flap to a double flap: you will need to order the inside mount.
Training flaps are intended for temporary use while the pet is getting used to their new door. We recommend these flaps for more timid, reluctant pets. Each one consists of thin vinyl strips with no real sealing capability. They are easier to use but should be replaced with a standard flap for better insulation performance when training is complete. They do not include any of the extra hardware that comes with standard flaps.
If your current flap is in good condition but you need extra parts such as additional magnets and strikes, check out our full list of dog door replacement parts. The additional strike and magnet kit can be added to make ensure that the pet door closes efficiently.
|Flap Size||Flap Dimension||Outside Frame Dimensions|
|Small||5 1⁄2" w x 7 1⁄2" h||8 3⁄8" w x 10 3⁄8" h|
|Small Medium||6 1⁄2" w x 9 1⁄2" h||9 9⁄16" w x 12 9⁄16" h|
|Medium||8 1⁄2" w x 12 1⁄2" h||11 9⁄16" w x 15 3⁄8" h|
|Tall Medium||8 1⁄2" w x 16" h||11 9⁄16" w x 19 1⁄16" h|
|Large||11" w x 16" h||14 1⁄16" w x 19 1⁄16" h|
|Tall Large||11" w x 19 1⁄2" h||14 1⁄16" w x 22 9⁄16" h|
|Tall Large Plus||11" w x 23 1⁄2" h||14 1⁄16" w x 26 9⁄16" h|
|Extra Tall Large||11" w x 27 1⁄2" h||14 1⁄16" w x 30 9⁄16" h|
|Extra Large||14" w x 19 1⁄2" h||17 1⁄16" w x 22 9⁄16" h|
|Extra Large Plus||14" w x 23 1⁄2" h||17 1⁄16" w x 26 9⁄16" h|
|Giant||15 1⁄2" w x 27 1⁄2" h||18 9⁄16" w x 30 9⁄16" h|
Hale Pet Door 5 Year Limited No Fault Warranty
All parts—including flaps—and labor.
Thank you for doing business with Hale Pet Door™. We are sure you will receive years of excellent service with your purchase. If the product does not meet your expectations, please contact our office for return authorization and return it within 30 days of purchase for a full refund of the purchase price. Be sure to pack the product well as we can only give 50% credit for a damaged pet door.
HSPD Manufacturing, Inc. guarantees and warrants, subject to the conditions and restrictions stated below, that the Hale Pet Door™ products and component parts thereof, purchased from HSPD Manufacturing, Inc. shall be free from any defects in materials and workmanship. The warranty period for all Hale Pet Door™ model pet doors is effective from the date of purchase and extends to the anniversary date marking the end of the fifth year. We agree to exchange or repair at our expense, F.O.B. our plant or warehouse any unit found to be defective in workmanship and/or material, subject to plant inspection. (See notes A and B below).
1st year – 100% of all parts and labor; 2nd year – 50% of all parts and labor; 3rd year – 40% of all parts and labor; 4th year – 30% of all parts and labor; 5th year – 20% of all parts and labor.
This warranty does not include shipping to HSPD Manufacturing, Inc. or any field service labor unless the product was installed by Hale Pet Door™.
A-Glass Breakage: We use fully tempered glass of the greatest quality and strength available for each application. It also meets or exceeds all safety glazing laws and codes in the United States. Even tempered glass will break on occasion, but it is very rare. When there is a breakage of glass for whatever reason, within the FIRST YEAR, we will replace the unit for 50% of the current total price. There is no warranty on the glass after the first year.
B-Parts Damaged by Misuse or Neglect: HSPD Manufacturing, Inc. will pay 20% of the cost of the current list price of parts and labor. No reimbursement shall be greater than the price of the replacement part.
C-Omni Oversize Panels: This application is not recommended. Therefore, we will only warranty 50% of the cost of the panel for the first year. However, the pet door itself is covered per our standard warranty.
HSPD Manufacturing, Inc. will credit 50% towards the cost of a replacement Hale Pet Door™ that was damaged due to mis-cutting, mismeasuring, or any other damage due to no fault of HSPD Manufacturing, Inc. HSPD Manufacturing, Inc. will not accept any responsibility beyond 50% if the damage is due to no fault of HSPD Manufacturing, Inc. HSPD Manufacturing, Inc. reserves the right to inspect any and all products before honoring any claim.
Watch this installation video prior to removing your old Hale dog door flap and installing the new one.
How to replace your flaps
How to clean your flap
What does the hale replacement flap come with?
You get the flap with the strikes installed, magnets, black nylon pile weather stripping, screws, and a drill bit.
Do I get all the hardware with the training flap?
No, only the normal replacements include hardware.
What are these made of?
They are a full 1/8" thick flexible material
Is this flap clear?
If I have a single flap what do I choose?
You would just need to choose the "Outside" mount.
If I have a double flap what do I get?
Choose either the Inside or Outside in the first drop down. Then just choose the "Yes also add the inside or outside" option. If you only need to replace the interior flap or exterior flap you can purchase just the one you need instead.
How do I know what size to get?
We include the flap measurements, but you can also figure out the flap size by measuring the outside frame of your door, tip-to-tip. This is necessary if you are trying to order replacements for a custom Hale door. Tip measurement ensures that you order the correct size.
Are custom flaps also on the website?
If you need customs then give us a call at customer service as that would be a special order.
Can I order custom flaps to fit my door even though it is not a Hale?
No, the custom flaps are only for Hale brand doors, so they would not fit any other brands of models.
Can I just purchase the replacement flap kit to turn my single flap into a double flap?
Yes! The hale dog door replacement flaps and kit can turn your single into a double flap. You will need to drill the holes into the pet door frame in order to install the new kit.
Are the hale wall pet door replacement flaps different from the door replacement flaps?
Nope, they are all the same and come with the same hardware.
If I have a single flap door is the 10HS03 OUTSIDE all I need?
That is correct, for a single you just need the outside mount.
Will these replacements work with the Security boss doors?
No that is a different manufacturer and these flaps are not interchangeable. They will only work for your Hale pet door.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.