Replacement Flaps

Useful information to identify your flap

» Check how the flap attaches to the frame at the top
» Read the logo to see the manufacturer
» Note the material of the flap - rigid or flexible? Clear?
» Look at the bottom to see the type of magnet
» Note anything else specific about your flap

Ideal Replacement Flaps | Clear material

Ideal Original [Old]

- Holes at top
- Smooth metal strip at the bottom
- Rectangular shaped logo in the center
- Made in USA written on the flap
- Buy Here

Ideal Original

- Holes at top
- Metal strip at the bottom with rivets
- Round shaped logo in the center
- Buy Here

Ideal Deluxe [Old]

- Ridge at top
- Smooth metal strip at the bottom
- Rectangular shaped logo in the center
- Made in USA written on the flap
- Buy Here

Ideal Ruff Weather

- Holes at the top, smooth edges
- Metal strip at the bottom with rivets
- Blank rectangular shape in the center
- Dimensions in the lower corner
- 2 flaps per pet door
- Buy Here

Ideal Insulator

- Holes at the top, smooth edges
- Metal strip at the bottom with rivets
- Blank rectangular shape in the center
- Staggered side magnets
- 2 flaps per pet door
- Buy Here

Draft Stopper/Ultra-Flex

- Attaches with pins at the top
- 3 clear rigid panels
- Flexes at connecting rubber material
- We only sell the entire flap
- Buy Here

PetSafe Replacement Flaps | Tinted material

PetSafe Freedom

- Holes at top
- Smooth metal strip at the bottom
- PetSafe logo in the center
- Buy Here

PetSafe Classic

- Raised bumps at top to slide flap
- Multiple magnets at bottom
- PetSafe logo in the center
- Buy Here

PetSafe Ultimate/Johnson

- 2-pieces, main flap + outer U-gasket
- Holes at top, multiple magnets at bottom
- Discontinued
- Buy Alternative (Pride)

Other Brands | Various styles

Hale

- Holes at top within metal bar
- Multiple magnets around border
- No logo, tinted but clear vinyl
- Buy Here

Endura Flap

- Attaches with rod at top
- Flexible semi-clear material
- Solid magnet strips along sides
- Buy Here

PlexiDor

- Saloon style flaps
- Clear but tinted rigid panels
- Purchase from PlexiDor directly 800-749-9609

No, we do not have the Johnson brand replacement flaps because they have been discontinued, however we do carry Pride replacement flaps which fit as a replacement for Johnson and PetSafe Ultimate doors. The only exception to this is that the small flap size has nubs at the top and slide into a channel which holds them in place rather than having to screw them in as was the case for the small Johnson/Ultimate flaps, so that size would not work without modification. Tons of customers have used Pride Flaps to replace their Johnson and PetSafe Ultimate pet doors.

The Pride flaps are made from recycled tires and are only offered in the thicker black heavy rubber. None of the clear flap are size compatible to the Pride. You will need to purchase replacement door if you would like a clear flap.

The stock number for Pride Flaps is 10ZS.

You can't mix the logos as the flaps won't fit each other. We suggest that you see the Ideal "original" and "Deluxe" Replacement Flap product page for more information.

The stock code for Ideal Original Replacement flaps is 10RIo.

The stock code for Ideal Ruff Weather Replacement flaps is 10RIr.

For a single flap Hale pet door, you should select the outside flap.

Flaps are not interchangeable, but if your dog is having difficulty pushing the door open, you can adjust the magnet strength for training by actually moving the magnets. We have an instructional video demonstrating how to adjust the magnet strength.

The door itself comes with two flaps, but when purchasing replacements they are sold individually, so you would need to order a quantity of 2 to replace both Ideal Ruff Weather Flaps. This is done so you can replace flaps when they wear out (as one flap might wear more than the other with use).

Yes, we carry the Pride replacement flap that will fit the PetSafe Ultimate and Johnson doors. There are a few models, such as the Quick Fit, that have been discontinued we no longer carry.

That would be for the PetSafe "Freedom", "Plastic", and "Extreme Weather" replacement flaps, as all those models start with a ""PAC..."".

The PetSafe "Classic" replacement flap is a suitable replacement for the Pet-Eze door. These flaps are being discontinued by PetSafe, so purchasing more than one might be a good choice while they are still available.

The single flap and double flap sizes are identical, although the space available for the pet do go through changes. The only reason we say the double flap is shorter is that you have 2 flaps that will hit each other as the pet is going in or out. Since each flap is about 7/8" in thickness when this happens you lose about an inch of space up at the top.

We suggest that you measure your pet from the bottom of their feet to the tallest part of their back for height, and for width, you can open a door in your home wide enough for your pet to walk through comfortably with a little room on either side and measure that opening. Another approach is to cut an opening in a piece of cardboard to the exact flap dimension we have listed on the size chart and see if your pet can pass through easily. This works the best for cats and small dogs. Remember to give a little extra height for a wall-through installation or if both tall and short pets must share the same door.

The different logos signify different flaps due to manufacturing changes. The rectangular logo signifies your flap was made in the USA while the round logo signifies your flap was made in Thailand. Depending on which model you have (rectangular or round logo), you must buy replacement flaps accordingly, as they are not interchangeable. Please take a look at our Ideal Original/Deluxe Replacement Flaps for more information.

Patio Pacific Endura Flap Pet Door Warranty: To the original purchaser, Patio Pacific warrants this product and all of its component parts to be free of defects in materials or workmanship for a period of 10 years from the date of delivery to the customer. Endura Flap assemblies are warranted for a period of 15 years. Endura Flap assemblies employed in commercial kennels are warranted for a period of 3 years. Damage caused by accident, improper installation, abuse or normal wear, including damage by pets or glass breakage, is specifically excluded from this warranty. Defective materials returned to Patio Pacific, together with proof of purchase, will be repaired or replaced and returned to the customer free of charge.

Existing Models of the Ideal Deluxe Pet Door purchased before 2006 will need a rectangular logo design on the flap.

Yes, the Hale flaps come with complete replacement nylon weather stripping, drill bit, replacement screws, and replacement magnets.

Yes, the Ideal Fast Fit Flap and Frame Assembly are available for purchase. Please make sure you are ordering the correct logo for your specific panel. If you don't have the flap you can figure out what logo you have a couple of other ways. You can measure the entire width of the panel, as these measurements changed when the manufacturing location did. Or if you unscrew the frame from the patio panel, if it's one piece that screws directly into the sides of the aluminum frame, it's an old-style rectangular logo. If the frame is two pieces that screw into each other than it a new style round logo.

The flap you are looking for is the PetSafe "Classic" Replacement Flap. If the flap measures 5" x 4" and is affixed to the frame by a single screw at the top of the flap, then it is the Classic Replacement Flap.