- Additional Hale magnet sets for dog door
- One magnet (for frame) and one strike (for flap) included
- Replaces loosened magnets
- Use to improve overall flap strength
The Hale dog door magnets or strikes serve to replace these parts that have loosened after excessive use, as well as to provide extra strength for areas with heavy winds. Whichever situation you're in, these magnets for dog doors and strikes are sure to get the job done. With a simple installation, your flap is soon to be improved.
Please note: Hale magnets and strikes only work for the Hale magnetic pet doors. Additionally, these magnets are not multi-purpose. While high-quality, they cannot be used for decals, real estate or yard signs, or cabinet doors. Please review the product details fully for more information.
Hale Pet Door 5 Year Limited No Fault Warranty
All parts—including flaps—and labor.
Thank you for doing business with Hale Pet Door™. We are sure you will receive years of excellent service with your purchase. If the product does not meet your expectations, please contact our office for return authorization and return it within 30 days of purchase for a full refund of the purchase price. Be sure to pack the product well as we can only give 50% credit for a damaged pet door.
HSPD Manufacturing, Inc. guarantees and warrants, subject to the conditions and restrictions stated below, that the Hale Pet Door™ products and component parts thereof, purchased from HSPD Manufacturing, Inc. shall be free from any defects in materials and workmanship. The warranty period for all Hale Pet Door™ model pet doors is effective from the date of purchase and extends to the anniversary date marking the end of the fifth year. We agree to exchange or repair at our expense, F.O.B. our plant or warehouse any unit found to be defective in workmanship and/or material, subject to plant inspection. (See notes A and B below).
1st year – 100% of all parts and labor; 2nd year – 50% of all parts and labor; 3rd year – 40% of all parts and labor; 4th year – 30% of all parts and labor; 5th year – 20% of all parts and labor.
This warranty does not include shipping to HSPD Manufacturing, Inc. or any field service labor unless the product was installed by Hale Pet Door™.
A-Glass Breakage: We use fully tempered glass of the greatest quality and strength available for each application. It also meets or exceeds all safety glazing laws and codes in the United States. Even tempered glass will break on occasion, but it is very rare. When there is a breakage of glass for whatever reason, within the FIRST YEAR, we will replace the unit for 50% of the current total price. There is no warranty on the glass after the first year.
B-Parts Damaged by Misuse or Neglect: HSPD Manufacturing, Inc. will pay 20% of the cost of the current list price of parts and labor. No reimbursement shall be greater than the price of the replacement part.
C-Omni Oversize Panels: This application is not recommended. Therefore, we will only warranty 50% of the cost of the panel for the first year. However, the pet door itself is covered per our standard warranty.
HSPD Manufacturing, Inc. will credit 50% towards the cost of a replacement Hale Pet Door™ that was damaged due to mis-cutting, mismeasuring, or any other damage due to no fault of HSPD Manufacturing, Inc. HSPD Manufacturing, Inc. will not accept any responsibility beyond 50% if the damage is due to no fault of HSPD Manufacturing, Inc. HSPD Manufacturing, Inc. reserves the right to inspect any and all products before honoring any claim.
Magnets (fit in the frame)
Use a screwdriver and mallet to tap out the magnets (from the inside of the frame). Be careful not to mark the frame of the pet door. Insert new magnets and tap with the handle of a screwdriver. Adjust by tapping or twisting a screwdriver under the magnets, again do this from the inside of the frame. See the screen model instructions for photos of magnet adjustment if needed.
Strikes (attach to the flap)
Simply place the strike over the edge of the flap in the desired location with the barbed prongs facing inwards, making sure the location chosen lines up exactly with the magnets in the door frame. Carefully using pliers, compress the sides of the strike towards each other, pressing the barbs firmly into the flap vinyl.