Hale Custom Dimension Pet Doors for Walls

SKU# 06HSWall

  • Get a perfect fit every time with this custom made pet door
  • Sturdy aluminum framing available in four attractive colors
  • Clear, flexible flaps are easy for pets of all sizes
  • Single or double flap lined with magnets and weather stripping for increased energy efficiency
  • Matching locking cover incorporates a pin lock for excellent security

Note: The custom heights and options are final sale with no returns.

View Warranty


Stock No: 06HSWall
Click Here To View Size Chart

Availability: In stock

Price From: $209.99
Loading options please wait..
Price From: $209.99

Hale Custom Dimension Pet Doors for Walls

Hale Pet Door for Wall Installation - White Frame

Hover over image to zoom

  • Get a perfect fit every time with this custom made pet door
  • Sturdy aluminum framing available in four attractive colors
  • Clear, flexible flaps are easy for pets of all sizes
  • Single or double flap lined with magnets and weather stripping for increased energy efficiency
  • Matching locking cover incorporates a pin lock for excellent security

Note: The custom heights and options are final sale with no returns.

Square Inch Range (width x height)Stock No
0-6406HS21
65-8806HS22
89-13606HS23
137-17006HS24
171-21006HS25
211-25206HS26
253-30406HS27
305-34506HS28
346-36706HS30
368-52206HS31

Options

After you make the basic pet door choices--flap size, single vs double flap and frame color--you will have 
an opportunity to make other product selections. These include:

  • Locking Cover Color Choice
  • Locking Cover Load Direction (to accommodate obstructions)
  • Extended Tunnel Length (for thicker walls)
  • Separate Inside Frame Color Choice


Hale Pet Door Custom Dimension Dog Door for Walls

Sometimes the location you have chosen for your in-wall pet door just isn't sized right for a pet door. There may be studs that can't be moved or plumbing in the way. Perhaps a window is just a little too low to the ground. Whatever the problem, the solution may be to order a petdoor built to just the dimensions you need Hale Pet Door can do just that. You specify the rough cut width and height and Hale will build a 'wall through' pet door to just that specification.

Here are a few things to keep in mind:

  1.  Remember that the width you specifiy is 'rough cut' not 'flap dimension'. You'll lose 2-1/16" in width and 1-3/8" in height due to the pet door framing. Be sure you've got enough left for your pet.
  2.   If you're trying to fit an existing hole, measure height and width in three locations--near the top, middle and bottom and choose the most narrow for your dimension. You won't need to leave 'a little extra' though. The manufacturer already does that.
  3. After you have the two measurements, multiply them together to get total square inches. You'll need this figure to order the pet door in the proper size and price. Remember, though, that the square inch range is only for pricing purposes.The pet door will be built to your exact specifications and will not be adjustable in the square inch range that you've chosen.
  4. Normally the locking cover slides straight down from the top of the pet door. This is the default design. However, if you've got an overhead obstruction you may choose to have the locking cover 'load from the right' or 'load from the left' at no additional charge.
  5. If your wall is unusually thick--ie over 10"--you'll need the 16" tunnel option. This option adds 10% to the cost of the pet door. Note that there is no accommodation for walls thicker than 16".

If what you really need is a custom dimension pet door to fit in something thinner than 2"--a French door pane, for example--you can order a Hale custom dimension pet door for doors in the manual->for 'people' doors section.

Return Policy Because these pet doors are built custom to your specification, returns will be allowed a 50% credit toward the purchase of a different Hale Pet Door. The Patio Pacific normal return policy applies in respect to time limits only.

Set Direction

Customer Reviews

  • Best doors ever review by Furrgus
    How do you rate this product?
    5 5 Best doors ever

    I'm purchasing a second wall mount because I was so impressed with the first one. The first was a double flap through the wall. Installed easy (I'm a woman), held up to direct blizzard winds and didn't let any cold air or snow into the closet. I have a Miniautre (toy size) Schnauzer so this time around I'll order the single flap. Order the rain flap, you won't be sorry! Love the doors and the customer service.

    (Posted on 6/4/2014)

  • Very pleased with quality and fit review by Ann C. in Colorado
    How do you rate this product?
    5 5 Very pleased with quality and fit

    I purchased a custom size to go into two pre-existing cut outs where we had previous dog doors. Both older doors were through the wall and were a single flap design which just could not stand up to our Colorado winter weather. I had been looking at Hale but was struggling with how I could get the standard cuts to fit. The cut out the contractor used for the original doors was an odd size. When I found the custom finished size option with Hale it was the perfect solution to my problem. Both doors that I ordered fit my existing cut outs perfectly. I was able to remove the old doors and easily slip these into place following the included instructions. Since I did not have to make any modifications to the house walls the installation was a breeze. Also the outside door has gone through 3 blizzards since being installed, and even with blizzard winds blowing directly into the door, the magnetics have held the flap in place and no snow has made it into the garage. Also the quality and construction of the unit is outstanding. I would highly recommend the Hale dog doors.

    (Posted on 4/7/2013)

Weight 23.0000
Manufacturer Hale Pet Door
Your Maximum Pet Size Cats, Large Cats, Small Dogs, Medium Dogs, Large Dogs, X-Large Dogs
Climate Suitability Severe-4 Season
Sealing Value High
Wind Resistance High
Frame Material Extruded Aluminum
Flap Material Vinyl
Flap Design Single, Double, One Part , Flexible, Thin Flap
Flap Colors Clear
Flap Thickness 1/8"
Ability to Lock Flap Separate Locking Cover-Loads from Front, Separate Locking Cover-Loads from Side, Separate Locking Cover-Loads from Top
Can Be Installed In Walls
Warranty Period 5 years limited
Return Period 30 days
Manufacturer's Restocking Fee 50%

Write Your Own Review

You're reviewing: Hale Custom Dimension Pet Doors for Walls

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
     

* Required Fields

Hale Pet Door 5 Year Limited No Fault Warranty (All parts-including flaps-and labor)Thank you for doing business with Hale Pet Door™. We are sure you will receive years of excellent service with your purchase. If the product does not meet your expectations, please contact our office for return authorization and return it within 30 days of purchase for a full refund of the purchase price. Be sure to pack the product well as we can only give 50% credit for a damaged pet door.HSPD Manufacturing, Inc. guarantees and warrants, subject to the conditions and restrictions stated below, that the Hale Pet Door™ products and component parts thereof, purchased from HSPD Manufacturing, Inc. shall be free from any defects in materials and workmanship. The warranty period for all Hale Pet Door™ model pet doors is effective from the date of purchase and extends to the anniversary date marking the end of the fifth year. We agree to exchange or repair at our expense, F.O.B. our plant or warehouse any unit found to be defective in workmanship and/or material, subject to plant inspection. (See notes A and B below)1st year – 100% of all parts and labor 2nd year – 50% of all parts and labor 3rd year – 40% of all parts and labor 4th year – 30% of all parts and labor 5th year – 20% of all parts and laborThis warranty does not include shipping to HSPD Manufacturing, Inc. or any field service labor unless the product was installed by Hale Pet Door™.A-Glass Breakage: We use fully tempered glass of the greatest quality and strength available for each application. It also meets or exceeds all safety glazing laws and codes in the United States. Even tempered glass will break on occasion, but it is very rare. When there is a breakage of glass for whatever reason, within the FIRST YEAR, we will replace the unit for 50% of the current total price. There is no warranty on glass after the first year.B-Parts Damaged by Misuse or Neglect: HSPD Manufacturing, Inc. will pay 20% of the cost of the current list price of parts and labor. No reimbursement shall be greater than the price of the replacement part.C-Omni Oversize Panels: This application is not recommended. Therefore, we will only warranty 50% of the cost of the panel for the first year. However, the pet door itself is covered per our standard warranty.HSPD Manufacturing, Inc. will credit 50% towards the cost of a replacement Hale Pet Door™ that was damaged due to mis-cutting, mis-measuring or any other damage due to no fault of HSPD Manufacturing, Inc. HSPD Manufacturing, Inc. will not accept any responsibility beyond 50% if damage is due to no fault of HSPD Manufacturing, Inc.HALE PET DOOR™ HSPD MANUFACTURING, INC. RESERVES THE RIGHT TO INSPECT ANY AND ALL PRODUCTS BEFORE HONORING ANY CLAIM.