- Dog door closing panel for the Gun Door House Dog Door models
- Installs on the interior side of the door or wall
- 1/4" thick polypropylene panel slides into aluminum channels to close off access
- Available in small and large sizes
- Comes in white
The Gun Dog Pet Door Cover is available in two sizes to work in conjunction with all four Gun Dog House Door models. The small size fits the Heavy Duty Dog Door and the medium size of the Easy Dog Door, and the large size fits the Big Dog Door and the biggest size of the Easy Dog Door. These dog door covers mount on the opposite side of the door or wall from the pet door, sliding down durable, aluminum channels. If you would like this closing cover to be lockable, drill a 1/2" hole through the cover and wall on the inside and insert a short dowel.
Not the right brand of doggie door cover? Take a look at our full brand selection of pet door locking covers.
|Flap Size||Flap Dimension||Max Opening Covered||Stock No|
|Small (Gun Dog House Door and Easy Dog Door)||11 1/2" w x 15" h||14" w x 20" h||11GD01|
|Large (Gun Dog Big Dog Door and Gun Dog Easy Big Dog Door)||16 1/2" w x 25 1/2"h||18" w x 28" h||11GD02|
Can you lock the panel?
It doesn't come with a lock, but you can drill a hole through the panel and insert a pin lock.
Which doors go with the Small?
Any door with a flap opening up to a max of 14"w x 20"h.
Which doors would need the Large?
Pet doors with an maximum opening of 18"w x 28"h.
Do I have to use this with Gun Dog Doors?
No, as long as you making sure that the dimensions of the pet door you are trying to cover fall under the maximum opening sizes it should work.
Is the panel going to be durable?
Closing panels by gundog doors are very durable, and that is why we recommend it being used for kennels.
Can I install it myself?
Since it does require some drilling as long as you are fairly handy you should be able to DIY through a door. However, in any wall installation you want to be super careful not to drill into any wiring, plumbing, or framing.
Does it only come in white?
You can paint the panel, but off the shelf it would be white.
Would I use this with a pet door or just by itself?
You can do either, but without a pet door when it's open it will not offer any insulation value.
Is there a bottom?
This would only be the 2 side channels, so if you wanted to make a stopper a the bottom you could put in a small screw or dowel right below the bottom of the slide. This would act as a stop so the bottom of the panel would rest on that when in place.
Could I hook up a pulley system for this?
Yes, but we would suggest that you go with the Gun Dog Guillotine Door, as that has the longer channels.
They no longer make the petsafe closing panel for my door, will this work?
You can really use this closing door panel with any pet door as long as the dimension are good and you have a way to mount the side channels on your current frame.
They don't make the petsafe closing panel for my door any longer, will this work?
Yes, as long as the opening is no larger than 18"w by 28"h it will fit over it. The only trick is that you do have to mount the channels to the frame on your current door, which could be tricky if you aren't handy.
Gun Dog House Door ® Co.
The Heavy Duty Dog Door®, Big Dog Door™, Easy Dog Door™ is covered by a limited lifetime warranty. We warrant this product to be free of defects in materials or workmanship for the life of your dog. Damage caused by accident, improper installation or abuse is specifically excluded from this warranty. Gun Dog House Door® Co. is not responsible for any incidental or consequential damage resulting from use of this product. Normal wear and tear excludes the hinges from warranty. Customers are responsible for all shipping costs.
Partial returns and/or damages will not receive full credit. Items damaged through USE or due to return shipping damage will receive partial or no credit. Should you decide that you wish to refuse receipt of an item when delivered by UPS, USPS, FedEx or common carrier and legimately ordered the product, credit will be issued minus any shipping custom fees and charges.
Please Note: The closing panel installs on the inside of the door or wall.
Step 1: Construct a 2” wide frame on the inside mounting surface.
Step 2: Place the channel angle 1” from the dog door opening.
Step 3: Install 1” tabs at the base of each channel.
Step 4: Slide the closure into place. Remove as needed.