Mason Company Pickwick Replacement Kennel Door Panels

Regular price
Sale price
Regular price
Sold out
Unit price

  • For Mason Dog Kennel Replacement Doors
  • Outside aluminum framing not included, only the plexiglass panel
  • Available for all Pickwick door models
  • Holes for hinge screws are not pre-drilled to ensure proper fit to your hinges

The Mason Pickwick Replacement Dog Kennel Doors replaces damaged or cloudy flaps. The replacement panel is made of the original, clear plexiglass. Please note that it does not come with pre-drilled holes; you will have to drill them prior to installation. This kennel dog doors flap is available for all models, so make sure to select the correct model at checkout. If you are unsure of which model you have, measure the panel and outside frame dimension, and refer to the size chart to find the corresponding model.

Not the dog kennel hardware you're looking for? Take a look at our full selection of Mason Company Kennel Doors and Kennel Door Parts.

Not the pet door replacement flap you're looking for? Take a look at our full brand and model selection of replacement dog door flaps.

Size Chart

Pickwick Kennel Door Model Covers Min-Max Panel Dimension Outside Frame Dimension
B11 1/8"-12 5/8" w x
17 1/2"-19" h
9 11/16" x 17"13 1/8" w x 19 1/2" h
A14 1/2"-16 1/4" w x
17 3/4"-19 1/4" h
13 1/16" x 17 3/16"16 3/4" w x 19 3/4" h
D13 1/2"-15 3/8" w x
19 3/4"-21 1/4" h
12 1/16" x 19 1/4"15 7/8" w x 21 3/4" h
E12 3/4-14 3/4" w x
20 5/8"-22" h
11 3/8" x 20 1/16"15 1/4" w x 22 1/2" h
F14 1/2-16 1/2" w x
21 3/4"-23" h
13 1/16" x 21 3/16"17" w x 23 1/2" h
C14 3/4"-17" x
27 1/8"- 28 1/2" h
13 3/8" x 26 5/8"17 1/2" w x 29" h
Purchase 2 or More of the Same Item for a Discount


My Pickwick door has an outside frame dimension of 13 1/2" x 19". Do you have a replacement flap?

We do not have that exact dimension. The closest we have is 13 1/8"w x 19 1/2"h, which is very close. This is Stock Number 10MC01 Model B.


Mason Company Pickwick Pet Door

Installation Instructions

Step 1: Unscrew the existing plexiglass panel from the metal frame.

Step 2: Line up the replacement panel with the frame and mark the hole locations for the screws on the new replacement panel.
Please Note: The holes are not pre-drilled, because over the years the hole placements have changed on the hinges.

Step 3: Drill holes through the marked spots.

Step 4: Line up the drilled holes with the hinges and screw into place.

Additional Information

Flap Colors


Customer Reviews

Based on 3 reviews Write a review